Adobe Audition supports 5.1 surroundsound, which requires five speakers, plus one low frequency subwoofer(LFE). To properly monitor 5.1 surround sound , your computer musthave a sound card with at least six outputs, and those outputs mustbe mapped to the correct channels in Audition.
Creative Surround Mixer 5.1
Determines how far around the surround field the sound extends. Forexample, 100% produces a focused sound originating from very few speakers,while 0% produces an unfocused sound originating from all speakers.
Sound Blaster Omni Surround 5.1 features Dolby Digital Live*, an advanced audio technology that delivers 5.1 discrete channels of vibrant surround sound for your digital entertainment, via a single cable.
Experience the wonders of multi-channel surround sound and create high-quality podcasts! Hardware-accelerated EAX effects lets you incorporate many types of sound effects with ease. Sound Blaster Audigy Rx features an SNR of 106dB, a 600-ohm headphone amp for studio monitoring, and a software suite that allows full audio customization.
The Sound Blaster Audigy Rx is an advanced sound card that represents the perfect upgrade from basic motherboard audio to immersive cinematic surround sound. With its advanced chipset designed to process our legendary EAX reverb engine, you can look forward to experiencing superb 7.1 multi-channel audio. It also features an SNR of 106dB and the Sound Blaster Audigy Rx Control Panel, a dedicated PC software that allows you full control of every aspect of your sound card.
Surround Panner is a free Max for Live device that makes mixing for performances, installations and theaters using multi-channel speaker setups possible in Live. Simply load the device into a track in your Live set and use the XY control to place it anywhere in the surround field. Eight presets allow you to choose between four-, six- and eight-channel setups.
Using a streamlined set of controls, Surround Panner gives you precise control of your surround field. The Rotate control allows you to adjust circular movement in a two-dimensional space. The Smooth control allows you to make fluid position changes, even when using stepped automation that would otherwise produce a jarring effect. Focus controls how much a signal positioned in one speaker bleeds into the other speakers in the array. And Center provides volume compensation for signals panned into the middle of the surround field [that usually sound louder]. Finally, a multi-dimensional crossfader enables experimental routing and advanced sound design.
Although consumers are slow to adopt systems that require a setup and are hampered by competing delivery standards, surround sound has at least one thing going for it: Few who get bit by the surround sound bug ever want to go back to plain old stereo.
With this in mind, we talked to a handful of the very best surround mixers in the business, including GRAMMY nominees and winners like Bob Clearmountain, Frank Filipetti, Jim Anderson, David Fridmann, Nick Davis, Ronald Prent, Morten Lindberg, Martin Walters, Keith O. Johnson and Greg Penny, about how to master the format.
The second approach is to throw out the rulebook, and treat surround like a completely new artistic medium. Mixers working in this way exploit the surround field to achieve a novel and ear-opening experience with a production aesthetic as developed as the music itself.
D: Enable other devices5: I then decided to cheat death and go back and re-enable the onboard sound. This step is entirely optional.5a: Go back into Device Manager and re-enable it.5b: Close surround mixer and re-open it; test it to see if it works. Nervous!5c: Cautiously restart. Test it again. Hooray!
There are other creative ways you can use filters and EQ to help complement the cinematography of a film. Look at the depth-of-field inside a shot and listen to hear if subtle EQ gestures applied to individual dialogue tracks can help follow the focus of the camera.
Did that film you mixed in stereo just get picked up for distribution? Suddenly need surround mixes overnight? If you have individual stems or submixes of the dialogue, music, and sound effects, you can use these guidelines as a starting point for creating your 5.1/7.1 mix:
5) Once this is done fire up iTunes or your favorite music app and you should have standard audio coming from the speakers hooked up to the X-Fi plus you will have 5.1 surround audio for surround-enabled audio sources
5) Once you are satisfied with the settings, double or right-click the "Multi-Output Device" and set it as the sound device and enjoy sound from your surround speakers and the built-in speakers at the same time!
I have noticed in a couple of movies that I've watched that I had to switch to the dedicated SB X-Fi Surround device to get actual surround sound. Looks like it's a function of which Dolby/THX encoding is used on the movie I am watching. Pretty easy to toggle back and forth and I don't have to restart anything to change the audio output.
I am so glad to see this. I'm new to Mac's, just recieved my imac 27" and I have an older logitech z-640 5.1 surround speaker system that works awesome (have been using it on older pc's and has true 5.1 with the proper card) that I wanted to use, so far, no way, until I found this post. I'll order the Creative X unit and give it a go. Thanks again Vegas7!!! I'll try and report back when I have the unit hooked up.
I have a Hercules USB sound card that will drive my speakers (I can get to the speaker config - they all test fine), but only the L/R ones are in use when itunes plays. Don't care about movies (I never watch movies on the mac - but I DO want full surround sound from my logitech X-530. Under boot camp - they sound great. Under Mac osx - they are 2.0 speakers ;-(
Well, I gave up on getting my Mac to upconvert 2ch into 5. Replaced my X-530s with Z506 speaker which do the upconversion in speaker. They sound great. They work in true 5.1 with my cheapo USB sound card (Hercules), but for the most part, I am just listening to tunes - in full rich surround. Simple.
Haven't tested movie surround sound yet (The 5.1 speaker sound tests are all working - so 5.1 with a movie should be fine) - but just to sit and get some proper decibels through iTunes is enough to make me write a thank-you.
I am following these steps on my macbook air os 10.10 with creative sound blaster x fi surround 5.1 pro, my problem is that all the speakers work when test in the configuration window, but only a select few speakers work when actually playing music. Here is an image of my setup
If you live alone as a carefree bachelor or bachelorette, a powerful surround sound speaker system attached to your gaming machine is the ultimate way to enjoy the latest AAA blockbusters. Positional audio is a beautiful thing. Not only does it add to the entertainment factor, but it also helps you along, feeding audible cues from the environment, revealing an enemy's position, and delivering the soundtrack that intensifies before an important action sequence.
Unfortunately, the reality of roommates, family, and even apartment living make it difficult to crank the volume up on a full-scale surround sound configuration without annoying everyone around you (particularly if you game at night). The solution for most enthusiasts is a headset. In addition to bringing the action in closer to your ears, a headset simultaneously arms you with a microphone, perfect for coordinating with a team or trash-talking opponents.
A lot of PC peripheral vendors are taking their first steps into audio. We're putting eight premium headsets through a vigorous testing regimen to quantify the good, bad, and ugly of "multi-channel" personal audio. Some of these devices truly facilitate 5.1-channel surround sound using discrete drivers. Others employ software-approximated virtual 7.1-channel surround sound to get the job done. How effective are they all at achieving their purpose? Let's have a look at specifications before going into detail on each product:
1sound has pops and cracks few times per second.also reported here: =6830864&postcount=82 remote control in this sound card is not implemented in driver, so no HID device is found, I tried it with lirc and driver usbaudio, but it didn't work.3. no mixer4. USB 1.0 speed prevents special features like surround and crystalizer to work
Now you can control your soundcard in the systemmixer (top right corner yousee a speakersymbol). There you have to choose the creativecard. Afterwardsyou can set the properties according to your needs.
Note: This assumes you are smart enough to plug in your own surround cables, USB cable, and power. The UR28M is the box many of us have been waiting years for and is fantastic once configured. However, the documentation available is worse than worthless as much of it is dead-ass wrong.
Step 1:Take UR28M out of box, find USB cable and throw everything else away!Step 2: Connect UR 28M to Mac and surround speaker cables.Step 3: Got to _hardware/downloads_ur28m.htmlStep 4: Download: Tools for UR28M, UR28M Firmware, the operational manual for the UR28M.Step 5:Install all apps including firmware update.Step 6:(After restart) Go to: Apps, dspMixFx_UR28M. I recommend dropping this on your dock as the name is not something you are likely to remember when looking for this app.Step 7:Open dspMixFx_UR28MStep 8:Click the little gear icon at the top right of the app window.Step 9:Under Output A/B/C Mode select INDEPENDENT.Step 10: Go to your UR28M and push Output A. Push Source Select until Mix 1 is highlighted.Step 11:Go to your UR28M and push Output B. Push Source Select until Mix 2 is highlighted.Step 12:Go to your UR28M and push Output C. Push Source Select until Mix 3 is highlighted.Step 13: Go back to dspMixFx_UR28M and click CONTROL PANELStep 14:Click Configure SpeakersStep 15:Select proper surround configuration from drop down at top right of window. It will most likely open with Stereo as the default. Yes, most of us will be selecting 5.1 Surround.Step 15:Use drop down menus at each speaker position to select the appropriate output for your setup. 2ff7e9595c
Comments